Skip to main content
Thule's new premium 9025xt Apex XT 4 bike hanging trailer hitch mounted bike carrier sports a sleek, stylish design that incorporates convenience, safety and security. Thule's Apex XT fits both 2" and 1.25" hitches right out of the box. The convenient SnugTite Locking Stinger mounting system offers tool-free installation or removal - simply loosen or tighten the hitch knob. To install, just push the tongue assembly into your hitch receiver until the integrated auto-hitch-pin snaps into place, then tighten the knob to activate the anti-rattle wedge mechanism to help eliminate bounce and sway for a secure and stable fit. The 9025xt Apex XT has a compact cradle design which accommodates a wide variety of bike frame styles and sizes. (Unconventional frames or traditional ladies' bikes may require a frame adapter bar like Thule's 982xt Bike Frame Adapter). Thule's new ratcheting style cradle straps make loading and unloading your bikes quick and easy. The bike cradles are now spaced 7" apart for better separation between bikes - eliminating the need to play "musical chairs" with your bikes to get them all loaded without rubbing and scraping one another. Integrated Anti-Sway fasteners provide extra stability and further reduce bike-to-bike contact. The Apex XT includes a quick release switch at the top that enables you to fold the bike arms down when not in use, and another at the base which allows you to tilt the rack away from your vehicle so you can easily access your hatch, trunk, or tailgate. The Hitch Switch mechanism has an audible click to assure you that the arms and mast are securely locked in position. The Apex XT includes full locking security for your rack and bikes - a built-in cable lock pulls out of the mast and locks into the end of one bike arm, and the locking hitch knob prevents your Apex XT from being removed from your hitch. 2 and 5 bike versions are also available (but do note that the 9026xt 5 bike version is only compatible with 2" receivers.)

Comments

Popular posts from this blog

Yakima's New RailGrab Towers for Factory Installed Side Rails

    Yakima has always had rock-solid options for putting crossbars on your vehicle's factory installed rails. Their LowRider and LowRider Max rack systems fit most vehicles with raised rails and the Locking EZ Rider towers fit most vehicles with flush rails. But now, Yakima has one tower system that works on both types of factory rails, the RailGrab. With the new Yakima 0138 RailGrab Towers for Railing Mounted Car Roof Racks , you can put Yakima crossbars on practically any factory installed rails, but this isn't your usual One Size "Fits" All situation. You truly get a custom fit for your rack, and if you buy a new vehicle, or you want to swap your rack between two vehicles, you'll still get a great, low-profile rack that fits like a glove regardless of factory rail type or size.     Installing Railgrab towers won't take very long. For the front crossbar, first slide two towers onto the bar and install the end caps to keep the towers from sliding off. Then

Rack Warehouse: Thule Tram Ski & Snowboard Carrier

  Rack Warehouse: Thule Tram Ski & Snowboard Carrier  The Thule Tram Hitch Mount Ski Carrier   is designed to attach to Thule's Trailer Hitch Receiver Mounted Bicycle Racks.  It can carry up to 6 pairs of skis, 4 snowboards or a combination of the two. The Thule Tram Hitch Mount Ski Carrier transforms your Thule trailer hitch bicycle rack into a stylish and practical snow sport carrier. The Thule Tram features ultra-soft rubber arms that securely holds and gently protects your skis and snowboards. The Tram's oversize push buttons allow for easy opening, even with bulky gloves or mittens. Thule's One-Key Lock System securely fastens your skis and snowboards to the carrier. The Tram Hitch Mounted Carrier easily fastens to your hitch mounted bicycle rack. Simply place the carrier into the bike cradles, fasten the bike carrier's straps over the Tram's frame, secure the bottom of the Tram to the bike rack mast with the provided bracket and have fun!  If you are us

Thule Evo Clamp Roof Rack with SquareBars

This is Thule's new 2019 Evo Clamp roof rack installed onto a 2015 MK7 Volkswagen Golf 5 door, sporting the heritage Thule SquareBar 135 , Fit Kit 5010 and Evo Clamp Foot Pack . The Evo Clamp rack system delivers a compact design with an all new Quick Access interface for smooth installation and removal. The Evo Clamp roof rack includes a new ergonomic torque limiter key which provides tactile feedback to ensure the correct assembly force has been applied. Thule’s SquareBar now uses a slotted under bar allowing compatibility with all Thule Evo and current Thule Rapid foot packs. The Evo Clamp works with all of the following Thule crossbar options: WingBar, ProBar, AeroBlades and SquareBars. Visit our Evo Clamp roof rack system video installation here: Thule Evo Clamp Roof Rack Video